search

Meyer Sound QuickFly Especificaciones Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 44
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
MG-MICA MULTIPURPOSE GRID AND ACCESSORIES
PN: 05.147.034.01 A
Page 12 of 44
Meyer Sound Laboratories Inc.
www.meyersound.com
T: +1 510 486.1166
F: +1 510 486.8356
MG-MICA GRID WITH MICA LOUDSPEAKERS IN REARWARD POSITION FOR MAXIMUM UPTILT
MICA loudspeakers can be connected to the MG-MICA grid in the “rearward” position in order to obtain the maximum
amount of uptilt for the array. The front and rear links are pinned to the grid on both sides in the positions labeled
“MG-MICA FRONT LINK Maximum Uptilt” and “MG-MICA REAR LINK Maximum Uptilt”. The uptilt of the MG-MICA
and the complete array hung underneath can be adjusted using chain motors, or differing lengths of steel or span set.
Follow the labeling on the grid to orient the loudspeakers; a large arrow on each side is labeled Front. The first MICA is
pinned to the grid at 0 degrees using the provided grid links.
CAUTION: Always use two 3/8" x 1.5" quick-release pins (with red release button; part #134.023) for
each link in the provided holes.
Attach the top MICA enclosure to the grid links with one 3/8" x 1.125" quick-release pin (with blue release button; part
#134.021) per link.
TIP: When the
links are inserted
in the rear position they
can be stowed inside the
MG-MICA for transporta-
tion.
CAUTION: The leveling feet must always be detached from the MG-MICA grid before flying a system.
Unscrew the entire assembly, including the threaded leg, and remove completely.
MG-MICA REAR LINK
Maximum Downtilt
MG-MICA
MG-MICA REAR LINK
Maximum Uptilt
MG-MICA FRONT LINK
Maximum Uptilt
Stowed
Position
Stowed
Position
MG-MICA FRONT LINK
Maximum Downtilt
MICA / 600-HP
REAR LINK
Ground-Stacked
Position
FRONT
MICA / 600-HP
FRONT LINK
Ground-Stacked
Position
1. Always use two quick release pins on each MG-MICA link.
2. DO NOT use gr ound-stack holes for flying points.
SAFETY WARNINGS!
Link Positions for Maximum Uptilt
MG-MICA REAR LINK
Maximum Downtilt
MG-MICA
MG-MICA REAR LINK
Maximum Uptilt
MG-MICA FRONT LINK
Maximum Uptilt
Stowed
Position
Stowed
Position
MG-MICA FRONT LINK
Maximum Downtilt
MICA / 600-HP
REAR LINK
Ground-Stacked
Position
FRONT
MICA / 600-HP
FRONT LINK
Ground-Stacked
Position
1. Always use two quick release pins on each MG-MICA link.
2. DO NOT use ground-stack holes for flying points.
SAFETY WARNINGS!
CAUTION: The
front and rear
grid links are of different
widths, and should not
be substituted for each
other. The rear link is
wider than the front.
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Comentarios a estos manuales

Sin comentarios
  • Vodafone M.E.Y. Equipment Mitsubishi Daiya American Machine & Tool O'Brien
  • Airstream Ventiladores domésticos Sharp Cajas registradoras Milwaukee Aspiradoras Minox No SanDisk No
  • Blomberg BRFB1800SSIM John-deere TerrainCut 8800 LG FB162 Genelec 8030A Alphasonik PEQ70E
  • Sony TA-FE910R Manual de usuario Philips CDR 560 Manual de usuario Senco SNS45XP Manual de usuario Gopro Hero 5 Black Manual de usuario Dell 3100cn Color Laser Printer Manual de usuario