Meyer Sound QuickFly Especificaciones descargar pdf (Pagina 22)

MG-MICA MULTIPURPOSE GRID AND ACCESSORIES

PN: 05.147.034.01 A

Page 22 of 44

Meyer Sound Laboratories Inc.

www.meyersound.com

T: +1 510 486.1166

F: +1 510 486.8356

In addition to its suspending capabilities, the MG-MICA grid forms a secure base for ground-stacking when the level-

ing feet are installed. For ground-stacking, secure the GuideALinks in the bottom MICA enclosure to the MG-MICA grid

using the red button 3/8" x 1.5" quick-release pins.

Use the link positions in the grid marked MICA / 600-HP Front Link Ground-Stacked Position and MICA / 600-HP Rear

Link Ground-Stacked Position. Pin additional MICA loudspeakers at the desired splay angles to form the array.

NOTE: Up to six (6) MICA loudspeakers can be easily ground-stacked on the MG-MICA grid. Because

of the increased difﬁculty of stacking more than this quantity, as well as for safety reasons, avoid

ground-stacking more than six MICA loudspeakers.

When the MICA loudspeaker is pinned directly to the MG-MICA grid, 10 positions from -2.5 to 3.5 degrees with re-

spect of the grid can be achieved with the use of the positions on the rear GuideALink. This is due to an offset of -2.5

degrees from the position number since the grid is ﬂat. Refer to Table 4 on page 23.

5. USING THE MG-MICA GRID TO GROUND-STACK MICA LOUDSPEAKER ARRAYS

CAUTION: To further secure larger ground-stacked arrays, particularly in outdoor situations, use a tie

down or weight on the grid and/or a safety system on the array.

CAUTION: When ground-stack-

ing with the MG-MICA grid,

always screw the four provided leveling

feet (part #124.878) into the four corners.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Sin comentarios

Meyer Sound QuickFly Especificaciones Pagina 22