Meyer Sound SIM 3 Guía de usuario descargar pdf (Pagina 44)

CHAPTER 2

The SIM 3 Hardware

The address can be changed using a small screwdriver or a pen.



Addr

+48v

Bus Pwr

Data





2.3.1.2. Microphone Inputs

The front panel has eight dedicated, 3-pin female XLR microphone inputs.

TIP: The 48 V phantom power for all eight inputs is always active when the

switcher is powered and the 48 V LED indicator is on.

In order to make measurements, the microphones need to be selected in the SIM 3 software

by constructing branches in the Branches dialog (by selecting Branch > Edit Branches).

Then select the address of the mic switcher you are using in the address box, and select the

desired mic channel as part of one branch.

NOTE: For connection diagrams please refer to “Section 2.3.3. SIM-3081

Microphone Switcher Connections."

2.3.1.3. LED Indicators

The blue LED above each XLR connector is a bus-select LED. If the LED is lit, then the signal

connected to that XLR is assigned to the “mic” bus of the Live Branch.

NOTE: The level of the selected channel can be monitored in the SIM-3022

analyzer. The front-panel Mic 1 meter will show the level of the signal on the

“mic” bus of the Live Branch, and the signal will be available on the headphones

output if Mic 1 is selected.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 231 232

Sin comentarios

Meyer Sound SIM 3 Guía de usuario Pagina 44