Meyer Sound SIM 3 Guía de usuario descargar pdf (Pagina 63)

CHAPTER 3

SIM 3 Configurations and Branches

Go to Settings > Front Panel to open the front panel dialog.

The Line section is divided into two columns:

■ Name: Enter a descriptive name for the line input. The defaults names for both inputs are

Line In 1 and Line In 2, respectively. This name will appear under the Branch tab for the

channel.

■ Comment: Enter any desired comments for the line input. The default is a blank ﬁeld.

The Mic section is divided into six columns:

■ Name: Enter a descriptive name for the mic input. The default names for both inputs are

Mic 1 and Mic 2, respectively.

■ Model: Enter the model name of the microphone if desired.

■ Sensitivity: Change the sensitivity of the microphone if desired. The default is 2.5 mV/Pa

for both inputs.

■ Location: Enter any desired information here about the location of the microphone. The

defaults for both inputs are Left and Right, respectively.

■ Function: Enter any desired information here about the function of the microphone

in your system. Typically the categories would be primary, secondary, and so on. The

default is a blank ﬁeld. The Model, Location, and Function entries are solely for record-

keeping, and only appear in the setup panel.

■ 48V: Check this box to ensure that phantom power (48 VDC) is supplied via the SIM 3

analyzer.

NOTE: The 48V checkbox does not need to be checked if you are using a mic

switcher.

NOTE: These connectors can also be used to make line-level measurements.

If you are using them for this purpose make sure the 48V phantom power is off

and the gain for that channel is set properly.

3.1.5. Naming Branches

Go to Settings > Branches. A branch’s name serves as a description for that branch, and

makes it easier to choose the desired branch to make or compare measurements. To change

the name of a branch from the default name Branch X, click in the left-hand Name ﬁeld to

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 231 232

Sin comentarios

Meyer Sound SIM 3 Guía de usuario Pagina 63